Getech IndustriesGetech IndustriesGetech Industries
HOMEABOUT USEXPORTSPRODUCTSROUTEMAPCONTACT USSITEMAP
 
Latest News
Our new innovation of Friction welded Induction Hardened Drill rods on jan 16 2009 as a first company in India.
Range of Products
Certificate
dthrotarydrilling.com 

Core Drilling Rigs

CORE cum DTH / ROTARY DRILL RIG CDR 400/CDR 700 CDR 1500

CORE cum DTH / ROTARY DRILL RIG CDR 400/CDR 700 CDR 1500  

 

 

 

Description Models
CDR 400 CDR 700 CDR 1500
Drilling Capacity: NQ 400 mtrs 0 to 45º DTH/ROTARY 200 mtrs --- NQ 700 mtrs 0 to 45º DTH/ROTARY 450 mtrs --- NQ 1500 mtrs 0 to 45º DTH/ROTARY 1000 mtrs 111
Angle Hole Drilling (Under Favourable Drilling Condition)
Mast: Type of Construction Centraliser opening Rotary Head Travel Rod Handling Capacity Sturdy Structural Box 300 mm 7.0 mtrs 6 mtrs Sturdy Structural Box 300 mm 7.0 mtrs 6 mtrs Sturdy Structural Box 457 mm 10.0 mtrs 9.0 mtrs
Rotary Head: (Speeds & Torques) Speed I, Torque – I Speed II, Torque – II Speed III, Torque – III Speed IV, Torque – IV Speeds – Torques 600 – 55 Kg-m 125 – 250 Kgm ……………….. ……………….. Speeds – Torques 900 – 70 Kg-m 500 – 125 Kg-m 185 – 340 Kg-m 103 – 608 Kg-m Speeds – Torques 1000 – 100 Kg-m 625 – 160 Kg-m 160 – 620 Kg-m 100 – 1000 Kg-m
Feed System: Pull up Force (Max.) Full down force (Max.) Rapid Speed (Up) 7363 Kgf 5054 Kgf 20 m/min 16,500 Kgf 10,000 Kgf 20 m/min 35000 kgf 13500 kgf 23 m/min
Hydraulic System: Max. Operating pressure Filtration (Nom) Tank Capacity 200 bar 10 microns 750 ltrs 225 bar 10 microns 800 ltrs 230 bar (open loop) 300 bar (closed loop) 10 microns 800 ltrs
Prime Mover: Input Drive Driven by Suitable Diesel engine Driven by Suitable Diesel engine Driven by Suitable Diesel engine
Levelling Jacks: Qty Cylinder Bore X Stroke 4 Nos. Ø 125 mm X 610 mm 4 Nos. Ø 125 mm X 610 mm 4 Nos. Ø 125 mm X 610 mm
(System Consists of Reverse flow Restricted Valves)
Main Hoist: Bare drum Pull Bare drum speed Drive Cable Diameter 5000 Kgf 40 mtrs/min Hydraulic Motor 16mm 10,000 Kgf 30 mtrs/min Hydraulic Motor 16mm 15,000 Kgf 40 mtrs/min Hydraulic Motor 22mmf
Mud Pump: Max. Flow Max. Pressure Drive 75 LPM 32 Kg/cm² Hydraulic 107 LPM 38 Kg/cm² Hydraulic 149 LPM 45 Kg/cm² Hydraulic
Wire Line Winch: Bare drum Pull Bare drum speed Drive 480 Kgf 60 mtrs/min Hydraulic Motor 1000 Kgf 100 mtrs/min Hydraulic Motor 2000 Kgf 150 mtrs/min Hydraulic Motor
  • Compressor/Rod changer/Hoist/Water pump with drive are offered as the per the requirement of the customer technical specifications.
  • GETECH Industries Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly.
(In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)

TRACTOR MOUNTED HYDRAULIC RIGS

CORE HOLE DRILLING BLAST HOLE DRILLING BOREWELL DRILLING

CORE HOLE DRILLING BLAST HOLE DRILLING BOREWELL DRILLING

GETECH's Hydraulically operated Tractor Mounted Rigs are specially designed for fast & cost effective drilling by air, mud or foam drilling methods using down-the-hole hammers & bits, core barred and tools, rotary tricone bits and other conventional tools as per customer’s choice, Hydraulic system powered by Tractor engine is operated by fixed displacement pumps, which regulates, rotary head speed, feed etc., Centralized control board located close to the drilling point ensures convenience of operation, GETECH Rigs require minimum maintenance and easy to operate.

Technical Data
Description Core Drilling Rig – TC – 40 Blast Hole Drilling Rig – TBH – 40 Borewell Drilling Rig – TBW - 40
Capacity
Drill hole Dia. Drill Depth Over Burden Drill Dia Over Burden Drill Depth
  76 mm (Core Dia.:54mm) 150 Ft. -------- --------   4.5” 150 Ft. 6.0” 150 Ft.   4.5” 500 Ft. 6.5” 150 Ft.
(Under favorable drilling conditions)
Hydraulic System
a) Prime Mover
b) Feed

Pull up Force Pull Down Force Pull Down Speed Pull up Speed
c)Rotation
Speed
Torque
Optional
Two speed R.H.
  Tractor Engine   4500 Kgf 2300 Kgf 30 m/min. 24 m/min   0-450 rpm 30 Kgf   0-450 rpm 30 Kgf 0-60 rpm 225 Kgf   Tractor Engine   4500 Kgf 2300 Kgf 30 m/min. 24 m/min   0-450 rpm 30 Kgf   -------- --------   Tractor Engine   4500 Kgf 2300 Kgf 30 m/min. 24 m/min   0-450 rpm 30 Kgf --------- ---------
Compressor: Min Suggested -------   450 CFM & 150 PSI   500 CFM & 200 PSI
Rod Changer --------- Single Rod Changer Single Rod Changer
Water Pump : Capacity Suggested min. Drive & Mounting   75 LPM @ 35Kgf/cm² Trailer Mounted Separate Engine Drive --------   36 LPM @ 28Kgf/cm²   Hydraulic
Hoist: 2.5 Tons @ 30 mtrs/min --------- --------------

GETECH
Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly.(In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)

SELF PROPELLED SIKD MOUNTED RIG

MULTIPURPOSE CORE DRILLING RIG, WATER, BLAST HOLE DRILLING

MULTIPURPOSE CORE DRILLING RIG, WATER, BLAST HOLE DRILLING

Technical Specifications
Description Core Drilling Rig - TC - 40 Blast Hole Drilling Rig - TBH - 40 Borewell Drilling Rig - TBW - 40
Capacity
Drill hole ia. Drill Depth Over Burden Drill Dia Over Burden Drill Depth
76 mm (Core Dia.:54mm) 150 Ft.------------ 4.5” 150 Ft. 6.0” 150 Ft. 4.5” 500 Ft. 6.5” 150 Ft.
(Under favorable drilling conditions)
Hydraulic System
a) Prime Mover
b) Feed

Pull up Force Pull Down Force Pull Down Speed Pull up Speed
c)Rotation
Speed
Torque
Optional
Two speed R.H.
  Tractor Engine   4500 Kgf 2300 Kgf 30 m/min. 24 m/min   0-450 rpm 30 Kgf   0-450 rpm 30 Kgf 0-60 rpm 225 Kgf   Tractor Engine   4500 Kgf 2300 Kgf 30 m/min. 24 m/min   0-450 rpm 30 Kgf   -------- --------   Tractor Engine   4500 Kgf 2300 Kgf 30 m/min. 24 m/min   0-450 rpm 30 Kgf --------- ---------
Compressor: Min Suggested   --------   450 CFM & 150 PSI   500 CFM & 200 PSI
Rod Changer -------- Single Rod Changer Single Rod Changer
Water Pump : Capacity Suggested min. Drive & Mounting   75 LPM @ 35Kgf/cm² Trailer Mounted Separate Engine Drive   --------   --------   36 LPM @ 28Kgf/cm²   Hydraulic
Hoist: 2.5 Tons @ 30 mtrs/min -------- --------
 
Send mail
 
 
Home | About us | Subscribe | Advertise in Magazine | Board | Technical Papers | Interview | E-Paper | Editor's Desk | Media Kit | Directory | Contact Us | Site Map
Terms & Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved.